1000T swager GT-1000T has a 2-pillar design and is produced from one single block construction, to ensure strength, long service life.
The swager is operated by electric foot pedal to allow the operator to use both hands during swaging.
The piston can be stopped at any place, to facilitate rope/eye adjustment and to make tool set-up quicker.
The piston will automatic stop when preset pressure reached.
The swager can press DIN3093 aluminum ferrules, FORM C aluminum ferrules, Steel flemish ferrules and so on.
|Max press power (KN)||10000kn|
|Max wire rope diameter in one pressing||44mm|
|Max wire rope diameter in multi-pressing||56mm|
|Max working pressure||56Mpa|
|Max piston movement||200mm|
|The speed of piston||8mm/sec|